Home Home  
Vector Modulators Vector Modulators  
Frequency Translator Vector Modulators  
Pulse Modulators Pulse Modulators  
BPSK Modulators BPSK Modulators  
QPSK Modulators QPSK Modulators  
Custom Devices Custom Devices  
Attenuators Attenuators  
Switches Switches  
Phase Shifters Phase Shifters  
Custom Sub-Assembly Custom Sub Assembly  
Featured Products Featured Products  

   Integrated Digitally Controlled PIN Diode
   I & Q Vector Modulator

Integrated Digitally Controlled PIN Diode I & Q Vector Modulator - Model SA-39-AR
Model SA-39-AR is an Integrated Digitally Controlled PIN Diode I & Q Vector Modulator, Amplifier and Negative Gain Equalizer that operates from 500 MHz to 2 GHz. This device offers simultaneous 60 dB and 360 degrees of dynamic attenuation and phase control with an accuracy of 0.06 dB and 0.1 degrees at any CW frequency. Across the entire band, V.S.W.R. is 1.8:1 with +30 dB of RF Gain held within a +/- 1 dB window to an output 1 dB compression point of +17 dBm. With two 12 BIT (I & Q) TTL compatible logic this device switches from state to state in 1.0 uSec.
Integrated Digitally Controlled PIN Diode I & Q Vector Modulator - Model SA-39-AR Control Slope Chart
 
Specification Integrated Digitally Controlled PIN Diode I & Q Vector Modulator
Frequency 500 MHz to 2 GHz
Dynamic Range Simultaneous 60 dB and 360 degrees
Phase Control 0.06 dB and 0.1 degrees at any CW frequency
Amplitude Flatness +/- 2.0 dB
V.S.W.R 1.8:1
Insertion Loss <15 dB
1 dB Compression Point +17 dBm
Switches from state to state 1.0 uSec