GT Microwave
Ph. :   973-361-5700
Fax :   973-361-5722
Email :   sales@gtmicrowave.com
Home      About Us     Request for Quote     Representatives     Contact Us     Email this Page     Site Map  
Home Home  
Vector Modulators Vector Modulators  
Frequency Translator Vector Modulators  
Pulse Modulators Pulse Modulators  
BPSK Modulators BPSK Modulators  
QPSK Modulators QPSK Modulators  
Custom Devices Custom Devices  
Attenuators Attenuators  
Switches Switches  
Phase Shifters Phase Shifters  
Custom Sub-Assembly Custom Sub Assembly  
Featured Products Featured Products  
  VECTOR MODULATORS   PIN Diode Amplified I & Q Vector Modulator Model   SA-69-GB:
  Model SA-69-GB is a 2.0 – 18.0 GHz, PIN Diode, Amplified I & Q Vector Modulator. The device exhibits 0 dB Gain nominal and 6 dB noise figure typical. This device simultaneously controls phase and amplitude with 360 Degrees and 15 dB of dynamic range. The phase and amplitude flatness is +/- 20 Degrees and +/- 3.0 dB. V.S.W.R. is less than 2.0:1 and with the amplifier there is no loss in signal power. It is capable of non-degraded performance at 0 dBm CW and can handle +20 dBm Max. It is Digitally Controlled via 2 sets (I & Q) of monotonic 12 BIT TTL compatible binary logic and switches in 500 nSec. The device has an input control slope characteristic that is linear with output voltage. The size is 4.25 x 3.5 x 0.75 inch.
 
  Amplified I & Q Vector Modulator Model SA-69-GB Control Slope Chart  
 
  Amplified Pin Diode, I & Q Vector Modulator Model SA-69-GB  
Frequency 2.0 – 18.0 GHz
Dynamic range 15 dB
Phase flatness +/- 20 Degrees
amplitude flatness +/- 3.0 dB
V.S.W.R <2.0:1 and with the amplifier there is no loss in signal power
Switching Speed 500 nSec
Size 4.25 x 3.5 x 0.75 inch
     
     
     
     
  G.T. Microwave Inc. 1-973-361-5700 fax: 1-973-361-5722