0.5 - 2.0 GHz True Position Vector Modulator

Model M2L-21N-0BT is a narrowband calibrated for True Position PIN diode I & Q Vector Modulator.

Model M2L-21N-0BT is a narrowband calibrated for True Position PIN diode I & Q Vector Modulator. This device simultaneously controls the phase and amplitude of a signal with 360 Degrees & 20 dB of dynamic range. True Position calibration sets the phase and amplitude to within +/-1 Degree and +/-0.25 dB accuracy from any single theoretical command. It is digitally controlled via 2 sets (I & Q) of monotonic 12 BIT TTL binary logic and switches in 500 nSec. The device control input slope is linear with output voltage.

Other Post

Attenuators

50 MHz to 18 GHz GaAs Digitally Controlled Attenuator

Model A3G-69N-3JQ is a Digitally Controlled GaAs Attenuator that operates from 50 MHz to 18 GHz.

Attenuators

26 - 40 GHz Digitally Controlled Attenuator

Model A3P-85N-3AM is a Digitally Controlled PIN Diode Attenuator that operates from 26.0 – 40.0 GHz.

Attenuators

250 - 500 MHz 80 dB Digitally Controlled Attenuator

Model A8P-12N-0JK is a Digitally Controlled PIN Diode Attenuator that operates from 250 - 500 MHz with a Dynamic Range of 79.98 in 0.0195 monotonic dB steps.



Designer and manufacturer of microwave integrated components calibrated to operate in various bandwidths within the 20 MHz to 40 GHz frequency range.


G.T. Microwave, Inc.
2 Emery Ave
Randolph, NJ 07869 USA
Phone: (973) 361-5700
Fax: (973) 361-5722
Email: sales@gtmicrowave.com